Technical Specifications
printing characteristics
Up to 5 lines of print
Characters height from 0.8 to 14 mm (0,032" - 0,56")
Line speed capability: up to 300 mt/min (984 ft/min)
Print rate: up to 2136 ct/sec
250 messages storage
Up to 250 characters storage per message
Selectable lines vertical gap
Font Matrix: 5x5, 7x5, 9x7, 15x10, 16x10, 24x16 and 32x18
Bold factor up to 8 times
Simple Logo creation and printing
50 Logos storage
Automatic calendar and expiration date print
Incrementing/decreasing product counters up to 9 digits
Repeat print - message function
Printing in all moving directions
Tower print function (Text rotation of 90°)
DIN print for cables sector
Negative print function
Print throw distance up to 90 mm (3,54")
bar codes
2/5 Industrial • UPC-A • CODE 39 • EAN 13 • CODE 128 (A,B,C) • EAN 128 (A,B,C) • 2D - Datamatrix • ITF (A,B,C)
traversing features
Fully integrated management directly from system panel
External power supply NOT needed
Print during forward and backward translation
Up to 12 prints adjustable per translation
Translation speed: up to 1 mt/sec (3,3 ft/sec)
Sensor for the synchronization with the conveyor
Automatic safety RESET on start up
control unit characteristics
Membrane keyboard solvent resistant
Blue WYSIWYG Display with high contrast 240x128 pixels
Stainless Steel structure AISI 304
Protection IP65
Conduit length: 4mt (13,1ft)
general features
Single Start/Stop button
Automatic cleaning in both Start up and Shut down
Vapour recovery system for low make up consumption
Print parameters stored within each message
Keypad access with password
Operator selectable foreign language prompts
Report function for executed printing counter
Messages storage with 8 digits alphanumeric text
printing head
Micro Print Nozzle for high quality resolution print (optional)
Hermetically sealed printhead components
Auto-phasing of ink stream for consistent print quality
Dimensions: 227mm x 42 mm x 49 mm (9,0" x 1,7" x 1,9")
Conduit inlet at 90° (optional)
Internal Supply Positive Air Function
external connections
Serial connection RS232 and RS485/422
Sensor management for product reading
System ready output
Shaft Encoder input for variable speed production lines
External alarm outputs with traffic light column
Parallel interface BCD
environment/electrical requirements
Temperature: from 5° to 45°C (40° - 113°F)
Humidity: 10 - 90% (non-condensing)
Single Phase, 85 - 240Vac, 50 - 60Hz, 200VA